5HX Circulating Grain Dryer

5HX grain circulation grain dryer adopts automatic control system, which is easy to operate, easy to manage and safe to use. It is widely used for drying granular materials and seeds such as rice, wheat, corn, soybean, rapeseed, etc. The machine uses the principle of mixed-flow drying, and its process route is drying—slow drying—drying—slow drying—drying—slow drying—drying. The drying section of the dryer is covered with rows of intake and exhaust angular boxes. Under the action of gravity, the grain flows downward according to an S-shaped curve, and is affected by the hot air flow. The hot air passes through a material layer of a certain thickness and then flows to the surroundings. The corner box becomes waste gas and is discharged out of the machine from the corner box.

Biomass coal-fired dual-purpose combustion furnace

Fuel coal burns after entering the furnace to generate heat. After combustion, the flue gas is input into the heat exchanger for multiple cycles and then discharged, and the cold air is output after being heated by the outer wall of the heat exchanger, which improves thermal efficiency, saves energy consumption, and effectively reduces costs.

Corn Thresher

This threshing machine adopts the design of three drums, nail teeth and kneading block, which has the characteristics of large output, low crushing rate, clean threshing and built-in cleaning device.

Mobile corn thresher

The 5TY-2650 corn thresher is the latest product developed by our company. This machine uses a turbocharged diesel engine as a power source. It uses a turbocharged diesel engine with strong horsepower, high efficiency and low fuel consumption. The threshing method is a single-drum axial-flow kneading type. There are kneading blocks spirally arranged on the main shaft. The drum is equipped with an adjustable concave plate. The threshing main shaft adopts a gearbox to control the speed, which can better adapt to different states of corn; Cleaning, snow removal, dust removal, lifting and other functions can adapt to the needs of different operating environments, and can improve the output while allowing users to have a better experience.

5XFZ-40D Grain selection sieve

The 5XFZ-40D single specific gravity cleaning machine is a composite structure of winnowing and single specific gravity table cleaning; the raw grain enters the vibrating screen to remove large and small impurities; then passes through the rear wind screen vertical air screen to remove light impurities such as dust; The material enters the specific gravity table, and the separation of light impurities and finished products is realized through specific gravity segregation. The impurities with small specific gravity are distributed on the surface and flow to the low end, and finally discharged from the light and miscellaneous port of the specific gravity table. Good materials are distributed at the bottom and flow to the high end. It is discharged from the hopper, and the final product is discharged from the high end of the specific gravity table.

5XZ-40 Grain selection sieve

This machine is an important equipment for the selection and processing of grain and agricultural by-products, and can be used for the processing and selection of various granular materials. Under the double action of aerodynamic force and vibration friction, the material produces specific gravity segregation. By adjusting the technical parameters such as wind pressure and amplitude, the material with larger specific gravity will settle to the bottom layer and move to a higher place under the vibration and friction of the screen surface. Smaller materials are suspended on the surface and flow down through the action of airflow, so as to achieve the purpose of separation according to specific gravity.